Ask the Expert Question-and-Answer Archive
(Hard Chrome Plating)

by Randy Taylor, Advanced Tooling Corporation
April, 2008

 

Corrosion Prevention

Q. I have a client frome the oilfields here in Texas. He replaces his chrome rods once a month due to corrosion caused by sand and saltwater. Is there something out there that could help my client? Something that will withstand the dirt and saltwater? I have looked into induction hardened chrome rods. But the companys that sell this product is not to sure this will work. Reason being is that the chrome is still only 0.005" thick.

A. Sand and saltwater are among the most severe conditions to deal with. 1.) Alternative coatings could result in a longer service life, for example., duplex chrome, nickel/chrome, electroless nickel, and HVOF. 2.)The client may also want to consider changing material for certain critical components to corrosion resistant alloys. I would initiate a test program to expose a variety of coated and CRES material specimens to the actual service environment for analysis.

RT

 

 


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.