Presented in Partnership with:
 
 

Chromium Plating Emissions Calculator

This calculator, developed by the Illinois Environmental Protection Agency, is designed to estimate emissions from chromium plating and anodizing operations. Simply enter production information and press "Calculate Emissions."

Production Information

Type of Plating
Amps used million Amp-hours per year
Control Equipment removal efficiency

Emissions (tons/year)

PART PM10 Chrome (Cr) Chrome VI (Cr6)

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.