Presented in Partnership with:
 
 

Ask the Expert Question-and-Answer Archive (TRI)

by Joelie Zak, Scientific Control Labs, Inc.
April, 2002

Lead Disposal

Q. I think I know the answer to this question from the class you taught me during AESF Week 2001, but I want your opinion anyway. We sold the lead liner from an old anodizing tank to a scrap metal dealer last year. The liner weighed about 1000 pounds. Does this action by itself trigger the submital of a TRI report?

A. This is a good question. Actually, if using the lead liner in the tank did not result any release of lead greater than a 0.5 lb. in 2002, then it is article exempt. You would need to demonstrate this by showing an analysis of your anodizing bath for lead and doing the appropriate threshold determination calculations. However, if other areas of your production trigger the lead threshold, the action of sending the liner out as scrap would be reported on the "recycled off-site" section of the Form R.

 

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.