Presented in Partnership with:
 
 

Ask the Expert Question-and-Answer Archive (TRI)

by Joelie Zak, Scientific Control Labs, Inc.
May, 2005

Lead Anodes in Hex Chrome Plating

Q. I am not manufacturing a lead compound that exceeds the threshold of 100 pounds but I did report lead in 2003 as otherwise used (auxillary or plating aid in the process which gives electrons during the plating operation, in another words the hex-chrome +6 will gain 6 electron from the lead anodes to deposit on the parts as neutral atoms during oxidation / reduction process). For this reason, I am reporting the lead anodes as otherwise used in the process due to the new threshold of 100 pounds There is about 930 pounds of anodes in the plating tank.

A. You should be doing a lead compound report. USEPA interprets that electroplating "coincidentally manufactures" metal compounds. Lead compounds are coincidentally manufactured in plating, wastewater treatment. Most chromium plating facilities are reporting as "lead compounds". You should be checking "manufactured, as a byproduct" as well as "otherwise use."

 

| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | NASF.org |


The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.