scott birnbaum (bernie@netusa1.net)
Mon, 02 Jun 97 05:48:23 PDT

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Gary Willard-G10982: "DES: Track spacing for 100V on internal layers"
Previous message: Andy Burkhardt: "Re: Co-planar Waveguide question!"
Next in thread: 75354.207@compuserve.com: "Re: Copper recycling"

We have a quantity of scrap boards, some with fused tin/lead and some with Organic coating which need to be recycled. (Sorry, no gold plating). Does anyone know of a company which recycles the copper from circuit boards (unpopulated)

Thanks for the info.

Bernie

75354.207@compuserve.com
Fri, 6 Jun 1997 22:43:39 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: CMJATMCM@aol.com: "Re: Solderability Tests of Boards"
Previous message: Michael Barmuta: "Re: Fab/Assy: Decapsulant method"
Maybe in reply to: scott birnbaum: "Copper recycling"

You may wish to contact Metallic Resources Inc. out of Twinsburg Ohio. They have at times been involved with the recycle of tin lead frames and bare copper laminate in smaller quantity. (less than truckload). If truckload quantities are available you might try Penninsular Copper. They advertise in the back of PC FAB.